Banner
Hotline: 0909259776 - 0762683380
Chi tiết sản phẩm

  • Line Magnetic LM-845IA Integrated Tube Amplifier
  • Đơn vị: CÁI
  • Giá: 108.000.000 vnđ
  • Lượt xem: 1466
  • The LM-845IA is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel. Single ended design, Pure Class A, Integrated Stereo Amplifier with 845 output power tubes. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
  • Liên hệ
  • Thông tin sản phẩm
  • Bình luận

LM-845IA INTEGRATED TUBE AMPLIFIER - SINGLE ENDED 845 - 2X22W

 

Giá niêm yết: https://line-magnetic.com.au/portfolio-item/lm-845ia/

 

Link tham khảo thêm: https://www.line-magnetic.eu/en/products-line-magnetic-en/integrated-tube-amplifier-line-magnetic-en/lm-845ia-amplificateur-int%C3%A9gr%C3%A9-single-ended-845-2x22w-detail

 

 

 

Line Magnetic Audio LM-845iA Integrated Amplifier +++ DeVore Fidelity O/93s

Review: Line Magnetic Audio LM-845iA Integrated Amplifier: https://twitteringmachines.com/review-line-magnetic-audio-lm-845ia-integrated-amplifier/

 

 

 

"Despite the Line Magnetic LM-845IA's scary-high voltages and intense heat, in the months it spent in my home it performed faultlessly, without stutters, burps, or parts failures. It brought a new dimension to my musical enjoyment, revealing the physicality and force in every recording I played through it, from Monteverdi to Merle Haggard, an experience that provided addictive amounts of fun. $4895 is hardly a modest sum, but using nearly any sensible metric of value, the Line Magnetic is a stone bargain. If Rubens had lived in the hi-fi age, I imagine that he would have appreciated its way of making music pulse with vigor and vitality. Unless you listen to little except baroque trios, and maybe even then, you should find a way to hear one. It's that good." Stereophile  |  Jun 18, 2021

 

Link: https://www.stereophile.com/content/line-magnetic-lm-845ia-integrated-amplifier?fbclid=IwAR31JUASeJl5kCgNzk1IkXm9W9jLoVW9aJ0Gk7wM6t3YS3DO1raXme_brPA 

 

 

 

Test bench by hifi-advice.com - View article

 

The LM-845IA is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel. Single ended design, Pure Class A, Integrated Stereo Amplifier with 845 output power tubes. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially disigned for power supply.

Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 845 offers a listening to an unusual musicality.  


Hightlights
- Single ended design
- Class A amplifier
- Point-to-point wiring
- High quality components  

 

 

 

TUBES
Input stage: 2x 12AX7
Rectifier: 1x 5AR4
Drivers: 2x 6P3P
Power stage: 2x 845 « single-ended » design and pure class A


Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs Load impedance: 4/8/16Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.  

Metal and removable tube guard cage Infrared
Remote control

 

Tubes Basics               Common Remplacements

12AX7                          12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
12AU7                          ECC82, 12AU7EH, 5814, 6189, CV4003
EL34                             6CA7

 

Specifications
Class A amplifier - 2x22W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response  (-1.5dB): 10 - 50.000 Hz
Sensitivity: 220 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω


Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

 

Included Accessories
2x Fuses
1x Remote control
2x Battery AAA
1x Detachable power cord
1x Manual
1x Warranty Card

 

Generality
Dimensions (L x H x P): 365 x 250 x 340 mm
Weight: 35 Kg

Finish: Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CÔNG TY TNHH ANH PHÁT DIỆP

 

CÔNG TY TNHH ANH PHÁT DIỆP

 

CÔNG TY TNHH ANH PHÁT DIỆP

 

 

 

 

 

 

Have your cake & eat it with Line Magnetic’s 845iA

 

The Line Magnetic 845iA (£3999/US$4895/€3999) is an integrated amplifier with three line-level RCA inputs and a low-ish power output. Even to seasoned audiophiles, 22wpc into 8 Ohms won’t sound like much. That’s because this Chinese-designed (and made) amplifier is a valve-based design where glowing glass bottles are deployed in its pre-amplifier and power amplifier stages. Also known as vacuum tubes, the valves ride on a single-ended Class A circuit. Digital capability? Nope. Phono stage? Nope. Headphone output? Nope. Heck, the 845iA doesn’t even have balanced inputs.

Nothing about the 845iA nods to the modern world. Weighing in at 35kg, it’s a million miles from modern-day Class D designs. Only a pre-amplifier input – that recasts the 845iA as a power amplifier – differentiates it in spirit from amplifiers coming to market sixty years ago. That and a small metal remote for volume & mute.

Front the Line Magnetic with a streaming DAC (as I did) and you have a neat two-box system. With an amplifier that’s arguably more future-proof than many ‘modern’ counterparts, where built-in digital-to-analogue converters can sometimes see the unstinting march of digital quickly leave them behind.

Back to those valves. Is their 22wpc enough to drive ‘normal’ loudspeakers properly? And how does the Line Magnetic sound? Does it stick to the stereotypical view of valves – buttery bass underpinning a sumptuous midrange and silky top end – or does it tread its own path?

 

 

 

Features & operation
This Line Magnetic integrated uses seven valves in total, each one (or pair) having different characteristics suited to a particular job. The single 5AR4 is a two-element valve without a grid that’s used for rectification, turning AC power into DC. In addition, the 845iA has 2 x 12AX7 valves in its input stage and 2 x 6P3 valves as drivers. Plus the two large 845 output tubes that give the amplifier its name.

The 845iA’s RCA inputs are on the rear (not always the case with valve amps). Next to them sits a single set of loudspeaker terminals with options for 4, 8 or 16 Ohm connections. We should use the ones closest to the nominal impedance of our loudspeakers.

The front panel is simple; two dials on the right – one for volume and one for input selection – plus an on/off switch to the left and a small ‘bias current’ meter in the centre. Two switches and four small slots on top allow us to adjust the bias current and eradicate mechanical hum from the three large transformers.

 

 

Some valve amplifiers offer auto biasing. Not the Line Magnetic, but adjusting the bias isn’t too onerous. Flick the switch for the chosen output valve, check the meter, adjust with a screwdriver if necessary. You’re aiming for 70mA. Repeat for the other valves. Finally, tweak the hum-balance slots if you can hear any buzzing (I never did). It sounds complicated but isn’t. Just watch your knuckles, those 845 valves run hot.

Everyday operation is methodical. Turn the volume to zero, switch the amplifier on, wait 30 seconds whilst it soft-starts. If you turn it off, wait two minutes before switching it on again. This better protects the valves. And don’t turn any valve amplifier on without speakers connected – you risk damaging the transformer and/or output valves.

 

 

 

 

Looks & build quality
The Line Magnetic wears its underpants on the outside; the valves are all prominently displayed in front of the output transformers (hidden away in the towers behind). Everything appears well screwed together. The finish is gloss black, lending the amp a dark and brooding air and, for some, the antithesis of chic. Using the supplied valve cage – designed to keep inquisitive fingers away from not inconsiderable heat – dampens the vintage vibe a little. User discretion is advised.

Personally, I love the Line Magnetic’s retro look. Those 845 valves are things of beauty; large, complex and mysterious. With the lounge lights low and the 845iA’s cage removed, there’s a real romance to proceedings.

Alas, after ten days of use, the 845iA gently shut itself down without warning. Its main fuse had blown, so back to (sole) UK dealer VAL HiFi it went. A faulty valve-base and associated diode were replaced. The damage had probably occurred in transit; it transpires that this sample had already done some serious mileage, visiting several other reviewers before arriving at my door. Once repaired, the Line Magnetic performed without issue.

 

 

Review equipment

The Graham LS6 standmount speakers (£2300, review here) have a manufacturer-rated 87dB sensitivity. That’s average for a standmount of their size and a more than fair test partner for the 845iA. KLH’s The Fives – up for review next – also got a brief run. At 87.5dB, their sensitivity is similar.

Cambridge Audio’s Edge NQ streaming DAC (£4500) played source. Gold Note’s 300wpc PA-10 monoblocks (£2600/pair) were used for a chalk-n-cheese power amplifier comparison.

I also tried – briefly – my regular Pro-ject S2 Stream Ultra / Mytek Liberty / SBooster front end with the 845iA. However, a slight audible harshness put paid to further listening. That was interesting. In every other system, this combination had shown itself to be on a par with the Edge NQ. The 845iA exposed a more pronounced performance delta that favoured the Cambridge unit.

 

 

Sound quality
I played some gentle classical guitar to (literally) warm up the 845iA and I noted a very pleasant sound, even when I wasn’t focusing all that much. Then onto “Sooki Sooki” from Gerald Albright’s 30 album for a blast of funk. The sheer force took me by surprise. The 845iA had announced itself, sounding much stronger than any 22wpc solid-state design. Want dynamic slam? The Line Magnetic gives us it in spades. At the same time, out the window went any (clichéd) notion of bass looseness.

Treble was also more direct than I had expected. Sweet n sugary it isn’t. More than once was I reminded of the ‘live music’ vibe felt during time spent with the Klipsch Heresy III and Forte III. However, the 845iA’s treble comes on as beautifully judged. With Britten’s 1st String Quartet, it positively shimmers. That’s especially noticeable once the Endellion String Quartet reaches the very highest registers. This is where most other amplifiers I know tip over into screeching.

The detail on show is a cut above, coaxing even more information from David Gilmour’s “Great Gig in the Sky” (from Live in Pompeii) than previously heard by this commentator. Normally, we hear Bryan Chambers join the song halfway through. In the Line Magnetic rendition, we realise he’s present from the beginning, subtly underpinning the vocal acrobatics of Lucita Jules and Louise Marshall before taking centre stage himself. Just glorious.

There’s more. The 845iA comes on as properly propulsive on The Sound of Afrotronica by Kaidi & NK-OK and it makes The Danish String Quartet’s Prism 1 sound almost ‘achingly’ poised. “They’re Calling Me Home” from Rhiannon Giddens and Francesco Turissi also captures the raw directness of her singing. It’s fair to say that it pushes all the right buttons for me.

 

 

Comparisons

I hooked Cambridge’s Edge NQ into the 845iA pre-amplifier inputs to bypass the Line Magnetic’s own pre-amplifier stage. The two sound very similar, but the Edge can’t quite match the realism or the directness of the Line Magnetic. The sound is slightly paler, player outlines a little more amorphous.
Switching back to the 845iA removes a fine mist that, hearing the Cambridge alone, you’d likely not notice. That said, other factors might push you closer to the Edge NQ e.g. the convenience of in-Roon volume control. For overall sound quality, the 845iA gets the nod. Just.

Enter the Gold Note PA-10 monoblocks to go up against the 845iA’s power amplifier. They’re both operating at the same high level but there’s clear water between them on presentation. The 845iA has a lighter touch, the Gold Notes favour a darker palette. Whisky drinkers will find the difference analogous to Laphroaig (845iA) versus Bowmore (Gold Note). In the coffee shop, we’d be talking lighter vs. darker roasts.

The Gold Note pair also sound more solid in the bass, mining the Grahams deeper than the Line Magnetic. Maybe 300wpc does count for something? Or maybe it’s the Italian’s solid-state nature. When it comes to dynamics though, the 845iA eats the 2 x PA-10. It also sounds more filigreed, more refined, with the Gold Note two-fer coming up shorter on a recording’s air and room ambience.

With pros and cons for each, the choice might also fall to accompanying kit. With the LS6, I lean toward the Line Magnetic but I could (and do) live happily with the Gold Note. With KLH The Fives, the Gold Note comfortably won the day, the 845iA sounding inexplicably harsh when paired with this newly revived model. It’s a finding that reinforces the importance of properly matching amplifier to loudspeaker.

 

 

Wrap

The Line Magnetic 845iA is the sort of product you get out of bed for in the morning. Paired with medium to high sensitivity speakers, it sounds robust and resolving, its extra resolution delivered with a most inviting lightness of touch. Here we have our cake and we can eat it too.

 

Source: https://darko.audio/2021/05/have-your-cake-eat-it-with-line-magnetics-845i/?fbclid=IwAR00RO7SgE-DoQDdknIWVsSd3G9IKb8Nw0o1DFjx8jh_r-e251fB9sQcjWg

Sản phẩm cùng loại
2019 Copyright © CÔNG TY TNHH ANH PHÁT DIỆP. GPDKKD số: 0313288153 do sở KH&ĐT TP HCM cấp ngày 04.06.2015. Địa chỉ: 172/138A An Dương Vương, P.16, Q.8, TP HCM. All rights reserved. Web Design by Nina.vn

Line Magnetic LM-845IA Integrated Tube Amplifier

Line Magnetic LM-845IA Integrated Tube Amplifier

Line Magnetic LM-845IA Integrated Tube Amplifier